Box Drawer Divider

Generator

Box dimensions (outer limit). Add external walls; wall thickness is subtracted on that side. Dividers in X and Y directions (e.g. 1–2 = 1×2 grid). Output: STL.

Box width [mm] Outer width (limit).

Box depth [mm] Outer depth (limit).

Box height [mm] Height of walls and dividers.

Bottom thickness [mm] Base plate (when enabled).

Outer wall thickness [mm] Left, right, front, back walls.

Divider thickness [mm] Inner dividers (X/Y).

Dividers (X direction) Count along width (e.g. 1 → 2 cells).

Dividers (Y direction) Count along depth (e.g. 2 → 3 cells).

Left wall

Right wall

Front wall

Back wall

Bottom (base plate) Uncheck for dividers-only (e.g. inside existing drawer).

Output

Set parameters and click Generate to create divider output.